CISA has added one new vulnerability to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation. CVE-2026-0257 Palo Alto Networks PAN-OS Authentication Bypass Vulnerability This type of vulnerability is a frequent attack vectors for malicious cyber actors and poses significant risks to the federal enterprise. Binding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living lis
View CSAF Summary ABB is aware of vulnerabilities in the product versions listed as affected in the advisory. A firmware update is available that resolves these privately reported vulnerabilities in the product versions listed as affected in the advisory. An attacker who successfully exploited these vulnerabilities could access sensitive information stored inside the device and can change the configuration of the device. The following versions of ABB EIBPORT are affected: EIBPORT V3 KNX (2CLA96
View CSAF Summary Successful exploitation of this vulnerability could result in an attacker gaining administrator access to the device. The following versions of Jinan USR IOT Technology Limited (PUSR) USR-W610 RS232/485 to Wi-Fi/Ethernet Converter are affected: USR-W610 RS232/485 to Wi-Fi/Ethernet Converter 7.03T.07 CVSS Vendor Equipment Vulnerabilities v3 9.8 Jinan USR IOT Technology Limited (PUSR) Jinan USR IOT Technology Limited (PUSR) USR-W610 RS232/485 to Wi-Fi/Ethernet Converter
View CSAF Summary ABB is aware of vulnerabilities in the product versions listed as affected in the advisory. An attacker who successfully exploited this vulnerability could gain physical, unauthorized access to a Building where the product is installed The following versions of ABB Busch-Welcome 2 Wire Door Opener Actuator are affected: Switch Actuator 4 DU vers:all/* Switch actuator, door/light 4 DU vers:all/* CVSS Vendor Equipment Vulnerabilities v3 6.8 ABB ABB Busch-Welcome 2 Wir
View CSAF Summary Successful exploitation of this vulnerability could allow an attacker to read and write arbitrary handle values and change clinical readings, which could result in taking control of the device and lead to patient harm. The following versions of Fourth Frontier Frontier X Mobile Application, Frontier X2 are affected: Frontier X Android application vers<v15.0.0 Frontier X IOS application vers<v25.0.0 Frontier X2 vers:all/* CVSS Vendor Equipment Vulnerabilities v3 8.8 Fo
View CSAF Summary Successful exploitation of this vulnerability allows an attacker's malicious script to execute in the browser of any authenticated user or administrator who accesses the affected interface. This could lead to compromise of user sessions, execution of unauthorized actions with the victim's privileges, exposure or manipulation of sensitive data, and degradation of overall system integrity. The following versions of CP Plus 8 Ch. Network Video Recorder are affected: CP-UNR-108F1
View CSAF Summary Successful exploitation of these vulnerabilities could allow an attacker to gain administrator rights or execute code on the affected device. The following versions of XCharge C6 are affected: C6 CVSS Vendor Equipment Vulnerabilities v3 9.8 XCharge XCharge C6 Download of Code Without Integrity Check, Stack-based Buffer Overflow, Initialization of a Resource with an Insecure Default Background Critical Infrastructure Sectors: Transportation Systems Countries/Areas
View CSAF Summary Successful exploitation of this vulnerability may grant full unauthorized access to camera feeds and settings. The following versions of KMW CCTV Security Cameras are affected: KM-IP521 IPCAM_V4.04.91.230307 KM-IP421 IPCAM_V4.04.53.210416 CVSS Vendor Equipment Vulnerabilities v3 9.1 KMW KMW CCTV Security Cameras Unverified Password Change Background Critical Infrastructure Sectors: Commercial Facilities, Government Services and Facilities, Critical Manufacturing
View CSAF Summary Successful exploitation of these vulnerabilities could result in an attacker gaining administrator access to the device. The following versions of MacGregor Voyage Data Recorder (VDR) G4e are affected: MacGregor Voyage Data Recorder (VDR) G4e CVSS Vendor Equipment Vulnerabilities v3 8.3 Danelec MacGregor Voyage Data Recorder (VDR) G4e Use of Default Credentials, Insufficiently Protected Credentials, Use of Password Hash With Insufficient Computational Effort, Use of H
CISA is prioritizing the response to multiple emerging software supply chain intrusion campaigns targeting developer ecosystems Continuous Integration/Continuous Development (CI/CD) pipelines. These recent incidents, including the GitHub compromise via a malicious Nx Console Visual Studio Code (VS Code) extension and the “Megalodon” supply chain intrusion campaign, demonstrate how cyber threat actors are abusing tools and processes that support enterprise, cloud, and DevOps environments—specific
CISA has added three new vulnerabilities to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation. CVE-2026-8398 Daemon Tools Lite Embedded Malicious Code Vulnerability CVE-2026-45321 TanStack Unspecified Vulnerability CVE-2026-48027 Nx Console Embedded Malicious Code Vulnerability These types of vulnerabilities are frequent attack vectors for malicious cyber actors and pose significant risks to the federal enterprise. Binding Operational Directive (BOD) 2
View CSAF Summary ABB is aware of vulnerabilities in the product versions listed as affected in the advisory. An attacker who successfully exploited this vulnerability could cause the pollution of heap memory which potentially takes remote control of the product and performs a write operation to the flash memory to alter the firmware behavior. The following versions of ABB Terra AC are affected: Terra AC wallbox (UL40/80A) <=1.8.32, 1.8.33 Terra AC wallbox (UL32A) <=1.8.2, 1.8.34 Terra AC wallb
View CSAF Summary ABB became aware of an internally discovered vulnerability in the MConfig product versions listed as affected in the advisory. An attacker with access to local networks who successfully exploits vulnerability could have access to application’s sensitive information. ABB strongly advises customers to update MConfig with latest software version. The following versions of ABB LVS MConfig are affected: LVS <=1.4.9.21 CVSS Vendor Equipment Vulnerabilities v3 7.4 ABB ABB LV
View CSAF Summary ABB is aware of public reports of vulnerabilities in a 3rd party component VLC media player Version 2.2.4 which was delivered together with the installation package of Camera Connect Version 1.5.0.14 and below. An update is available that resolves a privately reported outdated 3rd party component with vulnerabilities in the product versions listed as affected in this advisory. An attacker who successfully exploited any of these vulnerabilities in the 3rd party component could p
View CSAF Summary Successful exploitation of this vulnerability could allow an attacker to gain full access to functionality and data with the bioreactor. The following versions of Eppendorf BioFlo 320 are affected: BioFlo 320 Bioreactor vers:all/* CVSS Vendor Equipment Vulnerabilities v3 9.8 Eppendorf Eppendorf BioFlo 320 Use of Hard-coded Password Background Critical Infrastructure Sectors: Healthcare and Public Health Countries/Areas Deployed: Worldwide Company Headquarters Loc
View CSAF Summary ABB is aware of vulnerabilities in the product versions listed as affected in the advisory. The vulnerability enables unauthorized access to the Reboot OS function within the Remote Transport Service, allowing an attacker to trigger a system reboot without the required authentication. This functionality initiates a system reboot on the target machine. However, remote exploitation of this vulnerability is not feasible unless the attacker has already gained access to the network
View CSAF Summary ABB became aware of vulnerabilities in AC500 V2 listed as affected in the advisory. An attacker who successfully exploited this vulnerability could access fragments of Modbus telegrams that have been sent earlier by that PLC The following versions of ABB AC500 V2 are affected: AC500 V2 <=2.5.2, 2.5.3 CVSS Vendor Equipment Vulnerabilities v3 5.8 ABB ABB AC500 V2 Buffer Over-read Background Critical Infrastructure Sectors: Critical Manufacturing, Energy, Water and
View CSAF Summary An update is available that resolves a vulnerability identified by B&Rs internal security analysis in the product versions listed as affected in this advisory. An attacker who successfully exploited this vulnerability could cause the product to stop. The following versions of ABB B&R Automation Runtime DoS Vulnerability in System Diagnostics Manager (SDM) are affected: Automation Runtime <6.3 Automation Runtime <Q4.93 CVSS Vendor Equipment Vulnerabilities v3 10 B&R AB
CISA has added one new vulnerability to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation. CVE-2026-48172 LiteSpeed cPanel Plugin Privilege Escalation Vulnerability This type of vulnerability is a frequent attack vector for malicious cyber actors and poses significant risks to the federal enterprise. Binding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list
CISA has added one new vulnerability to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation. CVE-2026-9082 Drupal Core SQL Injection Vulnerability This type of vulnerability is a frequent attack vector for malicious cyber actors and poses significant risks to the federal enterprise. Binding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Known Exploited Vulnerabilities established the KEV Catalog as a living list of known Common Vulne
View CSAF Summary ABB is aware of vulnerabilities in the product versions listed as affected in the advisory. An attacker who successfully exploited this vulnerability could cause the pollution of heap memory which potentially takes remote control of the product and performs a write operation to the flash memory to alter the firmware behavior. The following versions of ABB Terra AC Wallbox are affected: Terra AC wallbox (JP) <=1.8.33, 1.8.36 (CVE-2025-10504, CVE-2025-12142, CVE-2025-12143)
View CSAF Summary Hitachi Energy is aware of the vulnerability, CVE-2022-4304 in the OSS component OpenSSL, that affects the GMS600 versions that are listed below. An attacker successfully exploiting this vulnerability could send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connec
View CSAF Summary ABB became aware of vulnerability in the product versions listed as affected in the advisory. An update is available that replaces an outdated third-party component. Although no successful exploitation was observed during testing of the affected B&R products, the identified vulnerabilities could present potential attack vectors that might enable unauthorized access, data exposure, or remote code execution. The following versions of ABB B&R Automation Studio are affected
View CSAF Summary An update is available that resolves a vulnerability identified by B&Rs internal security analysis in the product versions listed as affected in this advisory. An attacker who successfully exploited these vulnerabilities could take over a remote session or execute code in the context of the user’s browser session. The following versions of ABB B&R Automation Runtime are affected: Automation Runtime <6.4, 6.4 (CVE-2025-3449, CVE-2025-3448, CVE-2025-11498) CVSS V
View CSAF Summary ABB became aware of vulnerability in the product versions listed as affected in the advisory. An update is now available that addresses and remediates the vulnerability. A network attacker could exploit the vulnerabilities to execute remote code, initiate DoS attacks, conduct DNS cache poisoning, or extract sensitive information. The following versions of ABB B&R PCs are affected: APC4100 <1.09, 1.09 (CVE-2023-45229, CVE-2023-45230, CVE-2023-45231, CVE-2023-45232, CVE-2
CISA has added two new vulnerabilities to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation. CVE-2025-34291 Langflow Origin Validation Error Vulnerability CVE-2026-34926 Trend Micro Apex One (On-Premise) Directory Traversal Vulnerability These types of vulnerabilities are frequent attack vectors for malicious cyber actors and pose significant risks to the federal enterprise. Binding Operational Directive (BOD) 22-01: Reducing the Significant Risk of Kn
CISA has added seven new vulnerabilities to its Known Exploited Vulnerabilities (KEV) Catalog, based on evidence of active exploitation. CVE-2008-4250 Microsoft Windows Buffer Overflow Vulnerability CVE-2009-1537 Microsoft DirectX NULL Byte Overwrite Vulnerability CVE-2009-3459 Adobe Acrobat and Reader Heap-Based Buffer Overflow Vulnerability CVE-2010-0249 Microsoft Internet Explorer Use-After-Free Vulnerability CVE-2010-0806 Microsoft Internet Explorer Use-After-Free Vulnerability CVE-2026-410
View CSAF Summary Schneider Electric is aware of a vulnerability in its EcostruxureTM Machine Expert HVAC product. The [EcostruxureTM Machine Expert HVAC](https://www.se.com/ww/en/download/document/EcoStruxureME_HVAC/) product is a programming software for Modicon M171-M172 logic controllers. Failure to apply the remediation provided below may risk in revealing sensitive information, which could result in disclosing protected source code, leading to loss of confidentiality. The following version
View CSAF Summary Successful exploitation of this vulnerability could allow an attacker to take control of the victim's browser. The following versions of Kieback & Peter DDC Building Controllers are affected: DDC4002 <=1.12.14 (CVE-2026-4293) DDC4100 <=1.12.14 (CVE-2026-4293) DDC4200 <=1.12.14 (CVE-2026-4293) DDC4200-L <=1.12.14 (CVE-2026-4293) DDC4400 <=1.12.14 (CVE-2026-4293) DDC4002e <=1.23.4 (CVE-2026-4293) DDC4200e <=1.23.4 (CVE-2026-4293) DDC4400e <=1.23.4 (CV
View CSAF Summary A buffer overflow vulnerability in the User-ID™ Authentication Portal (aka Captive Portal) service of Palo Alto Networks PAN-OS software allows an unauthenticated attacker to execute arbitrary code with root privileges on the PA-Series and VM-Series firewalls by sending specially crafted packets. Siemens is preparing fix versions and recommends countermeasures for products where fixes are not, or not yet available. Customers are advised to consult and implement the workarounds